Product description

The CMX7364 is a flexible high performance wireless data modem featuring a high level of integration, including RF ADCs and DACs as well as additional low power data converters for monitoring and control purposes.  At its heart a powerful DSP core is coupled to optimised hardware accelerators to provide efficient, low power implementation of data modem functionality, principally PHY and MAC layers.  The device supports a range of formatted data modes as well as a raw mode that allows users to freely develop their own link protocols.  The formatted data models include optimised forward error correction and pilot symbol insertion where appropriate.

The CMX7364 provides a range of flexible digital interfaces to allow easy interfacing with microcontrollers and a pass through interface for control of RF circuits.  The internal filters support channel bandwidths from 6.25 to 50 kHz enabling over air data rates of up to 40 ksamples/s.

The design is capable of interfacing to different radio architectures but is ideally matched to CML’s CMX994 family of  direct conversion receivers and CMX998 I/Q modulator with Cartesian linearization and built-in support for these devices via appropriate Function Images includes DC offset correction and AGC control.

The CMX7364 operates from a single 3.3V supply voltage and is available in a 64VQFN package.

Functionality of the CMX7364 is determined by loading a Function Image™ supplied by CML. The Function Image™ is downloaded on power up and configures the device for the required modulation scheme and associated parameters.

Read More

Devices are available through our distributors below:

SalesNetworkLogoMouser_logo

Block diagram

CMX7364_block diagram

Product SnapShot

Features

  • Modem PHY
    • Rx and Tx data converters
    • Programmable channel filters
  • Modem Lower MAC
    • AFSD
    • FEC
    • Packet build
    • Pilot symbol insertion
  • C-BUS (SPI compatible) serial interfaces
  • Auxiliary functions
    • Low speed ADCs/DACs
    • Power Amplifier Ramp DAC
    • Programmable clock generator
  • Power management
    • Integrated core LDO
    • Automatic clock gating
  • Diagnostic functions

Applications

  • VHF/UHF modems
    • Telemetry
    • SCADA
    • RTK
  • Satellite modems
  • Custom ISM radios

Power supply requirement

  • 3.3V

Not quite sure what you’re looking for?
We can tailor an existing product to your unique requirements

Design resources

Evaluation and Demonstration Kits

PE0003

PE0003

The PE0003 Evaluation Kit Interface Card is a global interface system for use with evaluation kits for CML’s new generation ICs, including FirmASIC™ based products. This greatly simplifies the approach to the evaluation and design-in process. PE0003_Product_Page

PE0602-7364

PE0602_board

The PE0602-7364 Platform Evaluation Kit is designed to assist in the evaluation and application development of the CMX7x6x range of FirmASIC products.

Documents

PE0602 Product Preview

PE0602 User Manual

Knowledge Base

PE0602 High Resolution Schematics. Version B05. – Download

High Resolution PCB Overlay. Revision B. – Download

 

 

Ask a question

Request a quote