- Resources:
- datasheet |
- data updates |
- FAQs |
- software |
Features
- Two Complete Modem Channels
- Exposed Hardware Interface
- PCB Under Windows Environmental Control
- Windows-Based Software
- Parallel Port Interface
- Software Controlled Test Sequences with Result Logging
- Plug-in Extension Boards
- Software Selection of On-Board Signal Biases
- User Selectable Data Rates and Choice of Clock Xtal
- Access to ALL Modem Pins
- Modem-IC Internal State Display
- Independent Modem-IC Operating Voltage
- Modem IC Amplitude Adjustment
- Custom Tx Packet Configuration
- PTT Output and Carrier Sense Input Capabilities
- Hardware Interrupt
- Bit-Error Rate and Data Quality Checking
- Software and Firmware Available
Applications
- For Evaluation and Investigation of CMX909B, MX919B, FX919B, MX929B and MX929B ICs
Package Styles:
NA
Supply Requirement:
NA
Description
The EV9000 Evaluation kit, consisting of hardware and software is provided to help designers experiment, develop and evaluate designs based upon the CMX909B, FX919B, FX929B and CMX969 components.
This kit includes many useful features, including:
Two complete modem channels easily configured to the user’s selection of CMX909B, FX919B, FX929B or CMX969 components. Exposed hardware interface supports the connection of modem circuits to end-system designs. Display the state of each modem’s internal registers. Software controlled test sequences with result logs.
Prebuilt plug-in personality boards for narrow bandwidth 8kb/s GMSK and 19.2kb/s 4 Level FSK operation.
Windows based PC software provides virtual pushbutton control of all modem parameters. Software selection of on-board signal biasing and off-board noise signals for convenient and repeatable multivariable testing.
Parallel port connection to a PC.
User-selectable baud rates and choice of two crystal clock rates. Blank plug-in personality boards for user customised configurations.
The EV9000 Evaluation kit, consisting of hardware and software is provided to help designers experiment, develop and evaluate designs based upon the CMX909B, FX919B, FX929B and CMX969 components.
This kit includes many useful features, including:
Two complete modem channels easily configured to the user’s selection of CMX909B, FX919B, FX929B or CMX969 components. Exposed hardware interface supports the connection of modem circuits to end-system designs. Display the state of each modem’s internal registers. Software controlled test sequences with result logs.
Prebuilt plug-in personality boards for narrow bandwidth 8kb/s GMSK and 19.2kb/s 4 Level FSK operation.
Windows based PC software provides virtual pushbutton control of all modem parameters. Software selection of on-board signal biasing and off-board noise signals for convenient and repeatable multivariable testing.
Parallel port connection to a PC.
User-selectable baud rates and choice of two crystal clock rates. Blank plug-in personality boards for user customised configurations.
| EV9000 | Software Status | Remarks | Download |
ES9000 - v4.2 |
ES9000 42, ES9090 11, ES9690 10 software and manual to support the EvKit |