- Resources:
- datasheet
- |
- support package
- |
- PE0002
- |
Features
- Evaluation of CMX865, CMX867A and CMX868A
- Socketed target IC for ease of use
- Connectors for convenient connection to DAA, host micro cards and test measurement equipments
- Operation with users host controller card or with CML PE0001 interface card
- Test points for access to most useful signals
- On-board 11.0592MHz circuit
- On-board 3.3 volt regulator
- Powered by a single +5 volt unregulated supply
Applications
- For Evaluation and Investigation of CMX865, CMX867A and CMX868A ICs
Package Styles:
NA
Supply Requirement:
5 volt (nominal) dc power supply
Description
The EV8600 forms a basic evaluation platform for the CMX865/A, CMX867A and CMX868A wireline modems.
The board is populated with a dual-in-line socket to host the desired target IC and other components that are common to the two modems.
Two on-board connectors are provided for signal interfacing. The modem connector provides the analogue signal inputs and outputs plus other relevant signals to allow the addition of custom DAAs or to facilitate the connection of telecom test-measurement equipment.
The C-BUS connector breaks out the full C-BUS serial interface for convenient connection of a host processor card or the CML PE0002 Evaluation Kit Interface Card.
The EV8600 schematic diagram is available in the support package (see resources above). To allow the EV8600 to facilitate CMX865A evaluation, a header board (HB865A) is available.
The EV8600 forms a basic evaluation platform for the CMX865/A, CMX867A and CMX868A wireline modems.
The board is populated with a dual-in-line socket to host the desired target IC and other components that are common to the two modems.
Two on-board connectors are provided for signal interfacing. The modem connector provides the analogue signal inputs and outputs plus other relevant signals to allow the addition of custom DAAs or to facilitate the connection of telecom test-measurement equipment.
The C-BUS connector breaks out the full C-BUS serial interface for convenient connection of a host processor card or the CML PE0002 Evaluation Kit Interface Card.
The EV8600 schematic diagram is available in the support package (see resources above). To allow the EV8600 to facilitate CMX865A evaluation, a header board (HB865A) is available.
