EV9100 Evaluation Kit for CMX910

Description
The EV9100 evkit is available for the evaluation, experimentation and design-in of the CMX910 AIS Baseband Processor IC.

Comprising a digital/analogue pcb with an on-board CMX910 device, the evkit provides access to the CMX910's baseband signal, control and data interfaces as well as its auxilliary ADC and DAC functions.
The evkit also provides an FX604 FSK modem and associated circuitry to allow evaluation of the CMX910's external FSK interface.

Jumpers, links and test points allow the user to dynamically monitor and/or isolate all aspects of the IC's signal and voltage levels.
This evkit has a simple power requirement with on-board voltage regulation and distribution.

Support
Further information on the EV9100, evaluation resources, including the user manuals, application notes and FAQs can by obtained from the EV9100 zipfile.
[Download Support Files] In addition to the EV9100 user manual, this zipfile offers design files for a printed circuit board for CMX910 IC evaluation.

Enhancement
To further enhance the CMX910, its Special Command Interface (see section 5.12 of the latest CMX910 data sheet) can be used to reconfigure the CMX910's functionality to fully implement and improve its CS-TDMA reception capability.
For further information, please see the CMX910 Initialisation Procedure information available from the CMX910 technical portal area.

Resources: support \| user manual \| enhancement \|

Features Target CMX910 Installed Auxiliary ADC and DAC Interface Digital/Analogue PCB with Low Noise Floor Differential and Single-Ended Baseband Interface FX604 FSK Modem IC Fitted for Extra Rx Channel C-BUS Interface 19.2MHz Device Clock Interfaces to RF Daughter Board with all Necessary Signals On-Board Power Regulation and Distribution	Applications For Evaluation and Investigation of CMX910 AIS Baseband Processor

Description The EV9100 evkit is available for the evaluation, experimentation and design-in of the CMX910 AIS Baseband Processor IC. Comprising a digital/analogue pcb with an on-board CMX910 device, the evkit provides access to the CMX910's baseband signal, control and data interfaces as well as its auxilliary ADC and DAC functions. The evkit also provides an FX604 FSK modem and associated circuitry to allow evaluation of the CMX910's external FSK interface. Jumpers, links and test points allow the user to dynamically monitor and/or isolate all aspects of the IC's signal and voltage levels. This evkit has a simple power requirement with on-board voltage regulation and distribution. Support Further information on the EV9100, evaluation resources, including the user manuals, application notes and FAQs can by obtained from the EV9100 zipfile. [Download Support Files] In addition to the EV9100 user manual, this zipfile offers design files for a printed circuit board for CMX910 IC evaluation. Enhancement To further enhance the CMX910, its Special Command Interface (see section 5.12 of the latest CMX910 data sheet) can be used to reconfigure the CMX910's functionality to fully implement and improve its CS-TDMA reception capability. For further information, please see the CMX910 Initialisation Procedure information available from the CMX910 technical portal area.