- Resources:
- user manual
- |
- FAQs
- |
- software
- |
- ESFlash
- |
Features
- Evaluate Selcall, CTCSS, XTCSS, DCS, FSK, and Voice Functions
- TSSOP device socket provided on Board
- PC Controlled via Parallel Port Interface
- On-board reprogrammable FLASH PIC Microcontroller
- PC Software Supplied
Applications
- CMX881, CMX882 and CMX883 Signalling Processor Evaluation
Package Styles:
NA
Supply Requirement:
4.5V to 5.5V power supply
Description
The EV8810 Evaluation Kit has been designed for the purpose of evaluating the CMX88x family of devices. The family includes the CMX881, CMX882 and CMX883 Signalling Processors. The board interfaces to the parallel port of an IBM compatible PC, running the supplied application software under Windows 95, 98, ME and NT 4.0 operating systems.
The on-board PIC Microcontroller is a Flash device and can be reprogrammed via the controlling PC with the included programming software. Both the CMX88x target device and the Flash PIC are socketed, for easy replacement. This evaluation kit is supplied without any CMX88x target device. Samples of these should be obtained seperately from your local CML distributor.
The on-board audio power amplifier and 3.5 jack socket can be used to connect an external loudspeaker, and voice input can be handled via the on-board electret microphone. A user prototyping area is also included.
The board requires a 5V dc supply rail for the PIC Microcontroller and another supply rail for the device voltage, which can range from 2.7V dc to 5.5dc. These can be provided by one dual rail supply or two single rail supplies.
The EV8810 Evaluation Kit has been designed for the purpose of evaluating the CMX88x family of devices. The family includes the CMX881, CMX882 and CMX883 Signalling Processors. The board interfaces to the parallel port of an IBM compatible PC, running the supplied application software under Windows 95, 98, ME and NT 4.0 operating systems.
The on-board PIC Microcontroller is a Flash device and can be reprogrammed via the controlling PC with the included programming software. Both the CMX88x target device and the Flash PIC are socketed, for easy replacement. This evaluation kit is supplied without any CMX88x target device. Samples of these should be obtained seperately from your local CML distributor.
The on-board audio power amplifier and 3.5 jack socket can be used to connect an external loudspeaker, and voice input can be handled via the on-board electret microphone. A user prototyping area is also included.
The board requires a 5V dc supply rail for the PIC Microcontroller and another supply rail for the device voltage, which can range from 2.7V dc to 5.5dc. These can be provided by one dual rail supply or two single rail supplies.
| EV8810 | Support Package | |
|
EV8810_w.zip Rev
1.0. |
||