Call Progress Tone Detector
|
- Worldwide Tone Compatibility
- Single and Dual Tones Detected
- Wide Dynamic Signal Range
- Fast Response Time
- Low Power (Line) Operation
- 3.58MHz Xtal/Clock Oscillator
- 'Output Enable' Multiplexing Facility
- Worldwide Payphone Systems
- Telephone Redialing Systems
- Dialling Modems
- Banking and Billing Systems
- Telecom Test Equipment
- Telecom Security Systems
- CMX673D4 - 16-pin SOIC
- CMX673E3 - 20-pin TSSOP
- CMX673P1 - 8-pin PDIP
- 2.7 to 5.5 V power supply
The CMX673 is a general purpose call progress tone detector for use in Public Switched Telephone System (PSTN) applications.
Call progress detection allows equipment which dials into the PSTN network to monitor the progress of the resulting call: Ringing, Busy, Not Available and Answer states can be determined.
The CMX673 uses advanced digital signal processing techniques to detect tones in the frequency
band 315 to 650 Hz. The use of DSP techniques allows the CMX673 to distinguish between valid
call progress tone signals and line noise or voice, low false detection rates result.
This is in contrast to other call progress detection devices which are based on simple filtering techniques.
The detection timing of the CMX673 allows it to operate with almost any call progress system. In particular the ‘stuttered dial tone’ of voice mail messaging systems is supported.
The use of digital processing and small geometry CMOS design techniques allows the CMX673 to
offer a complete call progress detector which analyses both frequency and amplitude in a single 8 pin
(PDIP) package.
This, coupled with industry-leading performance and substantially lower power supply requirements
than comparable devices, demonstrates CML’s unique capability in this area.
Block Diagram
